How to Build a Lego Wall in Your Home or Office

John Reeve | September 6th, 2011 | , , , ,

Lego wall How-toMany web developers can trace their humble beginnings to the family room floor of their childhood, where boxes of Lego bricks spilled out into our imaginative hands and became flying cars, futuristic skyscrapers, impenetrable fortresses, and whatever else we could think to build. Yes, many of us enjoy developing web-based applications because it is so much like playing with Lego. Lego minifig The database, programming language, and server hardware are our building blocks from which we churn out web sites and online applications.

I’m one of those web developers who got his start in Lego and never stopped. When we came up with the idea to build a Lego wall at our office, I immediately hauled in a few buckets worth of Lego and then went to the hardware store for supplies. This wall mounted Lego board how-to will demonstrate how to build your own Lego wall for yourself, your kids, or just a fun event (Lego bricks make a great ice-breaker when left out at parties).

Step 1: Gather up your supplies

You will need the following supplies to get started. Depending on the surface you choose to mount you Lego wall, you may want to substitute the masonite board for a different backing.

Step 2: Mount the masonite board

Once the masonite board has been cut down to the appropriate size you will need to mount it. We recommend hitting at least a few studs considering the force generated by pulling Lego bricks off of the wall. Mount the masonite board using standard wood screws, and drywall anchors when a stud can’t be found. Use a level while mounting the masonite to make it even with the floor. Make sure to use flat-headed screws and drill them in far enough so the heads are flush with the surface of the masonite (otherwise, the Lego baseplates will have bumps underneath them when mounted.) The masonite board has a tough service so you will really have to drive in the screws to get them flush.

Step 3: Glue on the Lego baseplates

Using a caulking gun or a hand-squeezable tube, dab the glue onto the backs of the Lego baseplates. Good coverage is important to make sure sections of the baseplate won’t lift up. Press the baseplate onto the wall and use tape to secure it in place. This will stop the plate from sliding down while the glue dries. After the first baseplate has been mounted, use lego bricks to mount the second plate. By spanning the two baseplates using Lego bricks, you will ensure that the plates are properly spaced so Lego pieces will fit across them. This will result in a gap of approximately 1mm, which is somewhat conspicuous, but gaurantess the baseplates are properly spaced. Tape the additional baseplates in place as well to make sure the added weight does not pull the baseplates down.

Step 4: Lego brick storage

Lego wall storageNow decide where you want to store the Lego bricks. We chose to store them in buckets mounted below the Lego wall. We used some standard storage items we found at IKEA. You may want to just throw you Lego bricks into a box at the base of the Lego wall. Whatever you decide is up to you.

Step 5: Build something!

That’s it. The Lego wall is complete. Build anything you want. We decided to build a pixel version of our logo (which I’ll walk about in another blog post). Next up we’re planning on doing some of our favorite video game characters. The best part is that anyone can build anything they want, and the wall mounted Lego board makes for a nice break away from all the time we spend coding web sites.

Lego minifig photo credit: brad montgomery

2 Responses to “How to Build a Lego Wall in Your Home or Office”

  1. Tara says:

    My Lego baseplate is peeling off of the actual board. Can I continue to peel it off and glue it onto the wall?Thank you.
    Sincerely,
    Tara

  2. John Reeve says:

    Tara, I would advise regluing it to the actual board. If it’s glued directly to the wall it will most likely peel off the paint when it comes time to remove it. By reattaching it to the board you can peel the plates from the board and then remove the screws.

Leave a Reply

Intervals Blog

A collection of useful tips, tales and opinions based on decades of collective experience designing and developing web sites and web-based applications.

What is Intervals?

Intervals is online time, task and project management software built by and for web designers, developers and creatives.
Learn more…

John Reeve
Author Profile
John Reeve

John is a co-founder, web designer and developer at Pelago. His blog posts are inspired by everyday encounters with designers, developers, creatives and small businesses in general. John is an avid reader and road cyclist.
» More about John
» Read posts by John

Jennifer Payne
Author Profile
Jennifer Payne

Jennifer is the Director of Quality and Efficiency at Pelago. Her blog posts are based largely on her experience working with teams to improve harmony and productivity. Jennifer is a cat person.
» More about Jennifer
» Read posts by Jennifer

Michael Payne
Author Profile
Michael Payne

Michael is a co-founder and product architect at Pelago. His contributions stem from experiences managing the development process behind web sites and web-based applications such as Intervals. Michael drives a 1990 Volkswagen Carat with a rebuilt 2.4 liter engine from GoWesty.
» More about Michael
» Read posts by Michael

help.myintervals.com
Videos, tips & tricks